Permit Requirements for Chama, Colorado
For Plumbing projects in Chama, determining the correct permitting authority depends on whether the project site is located within the incorporated city limits or in an unincorporated area of Costilla County.
Authority Having Jurisdiction (AHJ)
Most jurisdictions require permits for Plumbing work to ensure safety and code compliance. The governing body responsible for issuing these permits varies by specific location:
General Plumbing Guidelines
Permits are usually required for new installations, structural modifications, or major repairs. While minor maintenance or cosmetic updates may be exempt, landowners should always verify local codes before work begins.
Help Us Improve This Guide
If you have found a direct link to a permit portal or a specific local ordinance for Plumbing in this area, please submit an update.
Because Chama is located within Costilla County, the following broader county regulations may also apply to your project:
Colorado, Costilla County Plumbing Permit Regulations and County Ordinances for Unincorporated Areas
Costilla County Building and Safety Divisions and Jurisdiction
In Costilla County, Colorado, the Planning and Zoning / Land Use Office is responsible for building permits and land use regulations. This jurisdiction applies to all land within the unincorporated areas of Costilla County. The county has adopted the 2018 International Residential Code (IRC) as its building code. All new development in Costilla County, regardless of location or zoning, requires permits.
Rules for Properties in Unincorporated Areas
For properties in unincorporated areas of Costilla County, a Land Use Permit is required for any change in land use, unless specifically exempted. Building permits are also required for any construction, including new residences, accessory dwelling units, accessory structures, or commercial/industrial buildings. The county requires a basic site plan for construction projects. If the applicant is not the property owner, a contract for sale, lease, or a notarized owner consent letter is necessary.
Specific permits may be required for various aspects of construction, including:
- Construction Application
- Manufactured Home Permit
- Onsite Wastewater Treatment System (OWTS) Permit
- Floodplain Permit
- Road Access Permit
- Minor Development Permit (for site preparation on 1 acre or more)
- Physical Address Permit (a $20 fee applies)
Plumbing work may also require separate state permits. It is the landowner's responsibility to obtain necessary county and state permits for activities such as drilling water wells or installing septic systems.
Permit fees vary, with a minimum fee of $20 for a physical address permit and $100 for accessory structures or demolition permits. Residential new construction fees are tiered by square footage, ranging from $300 to $600.
Construction permits must be renewed annually. The Land Use Administrator can issue up to three annual permits, with a fourth permit requiring a variance request to the Board of County Commissioners.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Colorado:
Colorado Plumbing Legislation, Codes, and Guidelines
State-Level Plumbing Codes in Colorado
The State of Colorado establishes minimum standards for plumbing installations through the Colorado Plumbing Code. This code is primarily based on the 2021 editions of the International Plumbing Code (IPC), the International Fuel Gas Code (IFGC), and the plumbing provisions of the International Residential Code (IRC). The state adopts these model codes with specific state-level additions, revisions, and deletions, which are codified in the Code of Colorado Regulations (3 CCR 720-1).
Regulatory Authority
The primary agency responsible for setting and enforcing these standards is the Colorado State Plumbing Board, which operates under the Department of Regulatory Agencies (DORA). The Board is responsible for licensing plumbers, registering apprentices and contractors, issuing permits for state-inspected areas, and conducting inspections to ensure compliance with the state-adopted codes. While the state sets these minimum standards, local jurisdictions may also adopt and enforce their own building codes, which can sometimes be more stringent than the state requirements.
Resources to Learn More